Hi-Tek Sealer is a water based, one coat silicone rubber solution.  When properly applied, it seals porous surfaces making them resistant to penetration by water or other liquids, while allowing air to permeate the coating.  Hi-Tek Sealer saves not only material costs, but labor costs as well.  There is no need for maintenance or seasonal recoats that are typically required with conventional water repellents. One application of Hi-Tek Sealer will substantially prolong the life, beauty and usefulness of any porous or non-porous surface and it is guaranteed for 20 years.

 

Performance:

·  Hi-Tek Sealer produces a clear penetrating film which does not discolor or degrade when exposed to ultraviolet radiation.

·  Hi-Tek Sealer provides maximum water repellency for wood, concrete, masonry or any porous surface and helps protect them from salt spray and acid rain.

·  Hi-Tek Sealer has been specially developed for use by the do-it-yourselfer, as well as the professional contractor alike.

·  Because of its unique formula, Hi-Tek Sealer can be mixed with all water-based or oil-based paints, and coating.  (mix one cup of Hi-Tek Sealer with each gallon of paint)

·  Hi-Tek Sealer provides an effective barrier to guard against graffiti penetration and allows for easier removal.

 

Warranty:

Hi-Tek Sealer warrants this product to be free of defects in material or manufacture for a period of twenty years from the date of purchase.  In the event of a claim for warranty, Hi-Tek Sealer, will replace the product free of charge, including freight, or at its option, refund the purchaser the price paid as evidenced by the purchaser’s receipt.

 

Uniqueness Of Warranty – You will find no other product in this price range that gives you such an extensive warranty.  The most common warranty for a sealant ranges from zero to three years.  Hi-Tek Sealer is made by reducing silicone rubber composition using a trade secret mixture and processing.  When Hi-Tek Sealer dries it cures and the product stabilizes and retains high elasticity and the outstanding quality of silicone rubber.  It will not yellow, doesn’t crack, dries clear and is unaffected by ultraviolet light, it cannot be eroded by salt and protects your surface for many years.  Hi-Tek Sealer also protects wood against termites, wood eating insects, rot decay, mold, warping and swelling.

 

Application:

·  Apply to a clean surface.

·  Repair any cracks in structure.

·  New concrete should be cured for 4 weeks prior to application.

·  If using a sprayer, cover plants and shrubs and move all objects that could come in contact with over spray.  Over spray can be removed by wiping or spraying with water.

·  A trial patch test is recommended prior to general application.

·  Replace cap on container to store remaining Hi-Tek Sealer for future use.

 

Hi-Tek Sealer has unlimited uses and can be applied with the following tools:

You may apply Hi-Tek Sealer on vertical or horizontal surfaces with a garden sprayer.  Excess liquid should be brushed into the surface or wiped off with a clean cloth.

 

Application of Hi-Tek Sealer by airless sprayer should be done by an experienced applicator.  Improper application could lead to thin or uneven coating which could affect the performance of Hi-Tek Sealer.  To aid penetration it is recommended that you back-brush or back-roll your application of Hi-Tek Sealer.

 

A roller with a nap of 1 inch or more is recommended when applying Hi-Tek Sealer on large vertical or horizontal surfaces.  Wipe off any excess liquid with a clean cloth.

 

Brushes are a very effective way to apply Hi-Tek Sealer to any surface.  For the best penetration always use a good quality bristle brush.

 

Hi-Tek Sealer is the registered trademark of American InfoTek

 

Apply Once Every 20 Years!

 

Hi-Tek Sealer is a unique water based sealer that extends the life and beauty of any porous or non-porous surface.  Use this guide for the estimated coverage per gallon.

 

Surface Type	Sq. Ft.
Aggregate	175
Asphalt	175
Awnings	250
Block	150
Brick	150
Canvas	250
Concrete	250
Decks	175
Leather/Vinyl	250
Masonry	250
Metal	250
Plastics	250
Patios	200
Stucco	150
Stone	175
Tile	275
Wood	250
Wood Shingles	200

 

These numbers are estimates.  Actual amounts could vary based on surface porosity.

 

One Coat Does It All!

·  Guaranteed to protect any porous surface up to 20 years!

·  Environmentally safe, non-toxic water-based formula.

·  Easy to apply by brush, sprayer or roller.

·  Recommended and used by Architects, Home Owners, Engineers, and Building Contractors.

·  Cleans up with soap and water.

 

Hi-Tek Sealer Products:

Wood                         Tile

Concrete                   Asphalt

Brick                          Plastics

Masonry                    Awnings

Plywood                   Wood Shingles

Patios                        Decks

Metal                          Block Walls

Sails                           Rubber

Auto Engines          Cloth 

Car Interior               Canvas

Auto Tires                 Leather

Computers               Electronics

Circuit Boards         And Much More!

 

CAUTION: Do not ingest or take Internally.  If swallowed, do not induce vomiting.  For eye contact: Flush with water.  For Skin Contact: Wash with soap and water. 

 

KEEP OUT OF REACH OF CHILDREN.